MegasquirtnSpark-extra
======================
Alpha version 027b expects Megatune 2.25b 627
http://not2fast.wryday.com/megasquirt/mt/prerelease/

When first upgrading to this version from anything earlier than 025m
you MUST re-create your settings.ini file using the master file
e.g.
copy c:\program files\megasquirt\megatune2.25b627\carmtcfg\settings.ini c:\program files\megasquirt\car1\mtcfg
then
notepad c:\program files\megasquirt\car1\mtcfg\settings.ini
and reset the code type, deg C/F, O2 sensor type.

Important... If loading MSQ earlier than 025x you must check the new idle settings
under Spark Settings. Set...
idle advance=-10
idle tps =0
idle rpm =0
...if you do not want to use the new feature.

********************************** N O T E ****************************************
027b  TIF fix.
027a2 Fix to .ini to allow tooth counts >63
027a1 Dual dizzy was reporting a false config error
027a Lots of stuff changed to support up to 6 spark outputs. Changes
     to wheel decoder to support missing and 2nd trigger.
     Added dual dizzy. Some work on dwell for oddfire
     Up to 6cyl COP, V12 waste spark.
     Plenty of potential for bugs. Be careful.

     Be sure to check your codebase/outputs. If you load an old MSQ
     you will get Spark E on by accident. Turn it off.

026i Re-write rpm calc for better oddfire averaging (fuel only)
you'll need to change "Gauge1" in msns-extra.ini to be tachometer to see
this on the FrontPage.
026h Added real time baro using norm map sensor when in alpha_n

026b Wheel decoder users see Advanced Code options
     Please try out the 025 and 024s9 decoders and report how you get on.

MSQ files from 024s9 will load, but PLEASE check all your settings
before trying to start your engine.

Please be sure to read the website - including the FAQ page.
http://megasquirt.sourceforge.net/extra

In this directory you'll find the most basic files you need

msns-extra.s19 -> download this to your Megasquirt board
msns-extra.ini      -> move into c:\program files\megasquirt\megatune2.25b417\mtcfg

Double click on copyini.bat to do this

To download the code to your Megasquirt board double-click on
download-firmware.bat and follow the instructions.

The  Default_files  directory contains example files to load into Megatune. You can
use these to load default settings into Megatune if trialling the software
without a megasquirt connected.

The SRC directory contains the source code. If you compile then make
make sure you then download the _new_ .s19

Note! If upgrading from an earlier version of MSnS-extra you are advised
to start with the default values and re-type your settings. 

IMPORTANT!
The release includes ALPHA-N support into the .ini file. If you want
normal speed-density then you MUST edit the settings.ini in your
car/mtcfg directory to include the following line:
#set	SPEED_DENSITY

IMPORTANT 2!
Please vote here:
http://www.msefi.com/viewtopic.php?t=4729