|
F
3 general regulations 1997
Maximum overall width 185 cm. The
bodywork ahead of the rear edge of the complete front wheels is limited
to a amximum width of 130 cm. Except fot the rollover structures no part
of the car can be higher than 90 cm from the ground. Minimum whwwlbase
2000 cm. Minimum track 120 cm. Minimum weight 530 kg. The engine block
and engine head castings must be thosse of a car engine equippping a car
model of which the FIA has ascertained the series production of at least
2500 units in 12 consecutive months. Original block and cylinder head
may be modified by the removal of material. Maximum number of cylinder
is four. Two stroke engines are forbidden. Rotary pistons are allowed.
Engine capacity must be exceed 2000 cc. Supercharching is forbidden. The
intake system is free but must be fitted with an air restrictor having
a maximum diameter of 26 mm. No more than one fuel injector per cylinder
is permitted. Variable valve timing is forbidden. Four wheel drive cars
are forbidden. All cars must have no more than five forward gears. Maximum
complete wheel width 11,5 inches. Wheel diameter 13,0 inches.
Same regalations are valid 1998-1999 too.
Seppo Pitkänen
Copyright 1996-2000. All rights reserved
Updated 15.03.2000
| << | <
| H | > | >> |
These pages
are under constant construction !
|